Jump to content

Jurassic World the Game: Get any pack (Swap method)


cisco72563
 Share

Recommended Posts

NOTE: You should enable string representation (in the memory editor). You should also have atleast some basic knowledge of GG, otherwise you might not understand somethings that are discussed below.

Ever wondered how you could get any pack that you wanted? Well now you can and for that follow the method given below.
For this you must go to the VIP LOYALTY PACKS tab (as shown in the picture below) and search for the pack's loyalty points. I used Oviraptor's pack as an example so I searched for 50000 (which is the amount of loyalty points to obtain this pack) as DWORD. (For good reasons I chose this pack as to not complicate things). If you are not a VIP (or don't have a VIP subscription), then, you can try this on the Henodus pack (pictured below), could be a different pack in your game.   

1.thumb.png.48cc42e9387d62754c59e5407cf2555b.png

You will end up with 130 or more results. Then use increment by 1 and close and re-open the loyalty packs screen. See what your new value of your pack is and save it, then revert other values and delete them. Change your saved value to either 0 or 1, then, go to it's memory address and scroll 30 to 31 addresses above your value to find your pack id (as can be seen in the picture below). There will be six addresses that look something like the picture below, you can also see that we have the string .Ovirapt present here. You need to change these 6 addresses to the pack that you want, let's find out how we can do that. 

2.thumb.png.bef3711825f213182a07e1741deb58ab.png

Now you will have to look for the pack that you want, I am going to go for Indominus Rex Gen 2 pack (for some strong reasons). So now you will need to search using the UTF-8 search. You need to search the string HIndom2 and you will end up with a lot of results. Check in these results if you find the string .HIndom2 and some values that look similar to the values as shown in the picture below in TYPE 1. If you find these values, then, select these 6 values and copy them, then, paste these values on your Oviraptor pack id that you found before (as shown in the picture above).
Remember that pack id's should look exactly like how they are shown in the picture below in TYPE 1 and TYPE 2 (values could be different but the presentation should look exactly the same). TYPE 1 is Indominus Rex Gen 2 pack (with string .HIndom2) and TYPE 2 is a different pack.

3.thumb.png.99c3c9e364502c46aaf72c659fb3391c.png

Once successfully done, then, close and re-open your VIP LOYALTY PACKS tab and you will see the change for yourself (as shown in the picture below), buy it and enjoy!  

4.thumb.png.8c75721ad8176b21f6a71ce11e07f2bd.png

IMPORTANT INFORMATION: There is no specific way to find all pack id's (since some pack id's do not have strings but have numbers instead of strings as can be seen in the first two addresses of TYPE 2 of the 3rd photo). The one easy way to find them is to first find the Indominus Rex Gen 2 id from string HIndom2 and then look above and below this id to find other pack id's. Hope this helps. Enjoy!

 

 

Edited by cisco72563
Link to comment
Share on other sites

this is Indominus Rex Gen 2 codes in my game(64bit)

= 1,850,296,334;846,032,740;65;57:33

as same with the 1st,2nd,4th and 5th address for your Type 1.

so far those values stay the same between restart.

btw you swap the pack with VIP Exclusive.(must we join VIP???)

while i swapped it with the non VIP(Henodus in your pic,different in mine) and it worked as well too.

Edited by MonkeySAN
Link to comment
Share on other sites

Well @MonkeySAN the first 2 addresses are the card id of your dino packs (sometimes the 1st 3 addresses like in the case of TwinYudon pack), like if you change the name of it with something else, you will get a different card. For example like the Henodus in the picture above (will be .Henodus, the first 2 addresses), select the 2 addresses, use UTF-8 and change it to Alberto and buy the pack and you will get the Henodus pack but inside will be an Albertosaurus card. Address 3, 4, 5 and 6 correspond to the card pack photo from which 4th and 5th address is fixed like you said while 3rd and 6th change after every restart, but these last 4 addresses just change the appearance of the pack. 

For the VIP Exclusive, yes you need to get the subscription for those packs. You can use Lucky Patcher for that.

Edited by cisco72563
Link to comment
Share on other sites

If you want to get Boss statue packs, then, search for the string DodoStatue as UTF-8 and follow the steps given above. Remember other boss statues are above and below this string but do not have any name, their data is just like the TYPE 2 picture (You will also find some other interesting statue packs). Also if you are using the armv7 variant, then, @MonkeySAN code of Mega S-DNA won't work for you, so, you need to search for the string BlueDDD and above the Blue pack are pack ids of Mega, Micro and Macro S-DNA packs.

Also Mega hack coming very soon!

1.thumb.png.8f59593f1ba2ec3c870d542b1abfe433.png

Link to comment
Share on other sites

  • 2 weeks later...

SCORPIOS REX pack(armv8)

= 1,699,891,212;7,563,128;65;51::33

= Dword

IMG_20220729_223956.thumb.jpg.ffa3ebdf99f59e02873e4922e60bffa8.jpg

this dinosaur is weird but i like it.

finally found it after long searching.

turn out just UTF-8 search

= HRex (in full = HRexgs)

thanks to @cisco72563 for all the guidances.

Edited by MonkeySAN
Link to comment
Share on other sites

Nice work @MonkeySAN good one, yup it is weird but strong as well.

TIPS TO SEARCH FOR A SPECIFIC DINO PACK

Here are some tips that I think would be of some use to you, if you need a specific dino pack (without wasting a lot of time).
If you want to search for a simple dino pack, let's say a Velociraptor pack, then, you need to search for just the first 7 letters of your dino's name as UTF-8. The first letter of your dino's name is usually a capital letter. So, for Velociraptor it will be Velocir as UTF-8. If let's say you want a Gen 2 pack, so, you need to search for the first 6 letters of your dino's name and add a 2 at the end of it. For Velociraptor Gen 2 it will be Veloci2 as UTF-8. For a hybrid, you need to use H before your dino's name and then the first 6 letters of your dino's name. Like for Dunkleosaurus pack you will search HDunkle as UTF-8 and if your dino is a Gen 2 and a hybrid, then, you need to put H in the beginning of your search and 2 at the end of it and just the first 5 letters of your dino's name, like HIndom2 as UTF-8 for Indominus Rex Gen 2. For dino's that have less than 5 letters in their name, the game uses D at the end of it like BumpyDD and BlueDDD. 

For some cases like the Scorpios Rex, the name could be very different and not the direct name of the dino. If you cannot find your dino from the above methods, then, simply search for your dino's name or just a few letters from your dino's name, like for Scorpios Rex just search Scorpios as UTF-8.
You will be left with some results, check in these results and look above your dino's name, and you will see the relative id of your dino, as shown in the picture below. This will save a lot of your time, then, you can use these id strings to your advantage and find the exact pack that you were looking for. Hope this helps!

1.thumb.png.564fffd57aa651fbd877119e2d916a17.png    

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.