Fire Emblem Heroes

[damienhell]

1 hour ago, Jeronimous said:

It is, you only have to do one copy/paste with CE.

Someone here made a video: alphagamers (dot) net/threads/r-fire-emblem-heroes-ver-1-0-2.248478/page-30

The video is using ceserver but that's absolutely redundant, you don't need it at all. When selecting the target process in CE choose NoxHandle.

thx for the tip, but now i having a hard time installing csserver. Do you have a simple guide how to?

[youwont123]

1 hour ago, lilb3ar10 said:

 

 

follow the same steps.

1. find enemy value. We'll say Taco for this example.

2. find your unit value. I find it easier to find your "shell" units value in the unit page. then when you look for it on the battle its the one that wasn't on the unit page. AKA the one that you'll be changing.

 

you can search for them in cheat engine the same way.

 

3. Once you have the correct values make sure you're in the info screen for the shell.

4. open the windows calculator switch it to programmer mode (hex mode) and look for the value of the unit you want. it will be something like 1234 5678.

5. subtract 118 from it. in this case its value will be 1234 5560

6. on the value you found for Taco search for 1234 5560

7. copy that line unti the line above 1234 5678. It should be line 1234 5670. 

* you copy by clicking and dragging the values. they will turn red. copy with ctrl + c

8. now do the same to your shell unit. 

* find address, subtract 118 in hex mode, select all the values up to but not including the original value, and ctrl + p or right click paste from clip board.

 

once you finish the fight go and unequip the weapon to save the unit to the server and next time you log in you'll be able to fully edit the unit.

 

Can you elaborate on step 6. I'm not sure what to do after getting the two values for each unit.

[lilb3ar10]

1 minute ago, youwont123 said:

4. open the windows calculator switch it to programmer mode (hex mode) and look for the value of the unit you want. it will be something like 1234 5678.

5. subtract 118 from it. in this case its value will be 1234 5560

6. on the value you found for Taco search for 1234 5560

 

1 minute ago, youwont123 said:

Can you elaborate on step 6. I'm not sure what to do after getting the two values for each unit.

 

Sure step 6 is basically (original address for unit you want in this case 1234 5678) minus 118 in hex = 1234 5560.

 

now. while browsing memory address in CE you can right click and (Go to Address) and you type in your value 1234 5560. after that you copy all the lines down to the one above 1234 5678. 

 

I'm currently having issues with nox so i cant post screenshots but i'll try with another random game.

[kavanna]

1 minute ago, lilb3ar10 said:

 

 

Sure step 6 is basically (original address for unit you want in this case 1234 5678) minus 118 in hex = 1234 5560.

 

now. while browsing memory address in CE you can right click and (Go to Address) and you type in your value 1234 5560. after that you copy all the lines down to the one above 1234 5678. 

 

I'm currently having issues with nox so i cant post screenshots but i'll try with another random game.

Is there any way you could make a video of how you clone a hero? Would be super helpful for beginners:p

_______________________________________________

added 4 minutes later

2 hours ago, Jeronimous said:

It is, you only have to do one copy/paste with CE.

Someone here made a video: alphagamers (dot) net/threads/r-fire-emblem-heroes-ver-1-0-2.248478/page-30

The video is using ceserver but that's absolutely redundant, you don't need it at all. When selecting the target process in CE choose NoxHandle.

 

How do you actually enter this address..? youtu..be/8wWf2EFCjf

[lilb3ar10]

5 minutes ago, kavanna said:

Is there any way you could make a video of how you clone a hero? Would be super helpful for beginners:p

 

As much as I feel I owe it to the community. I don't really have the resources to make a good video. I'll just post some screenshots later. I just reinstalled nox and its downloading FE. 

Give me about an hour.

[mapleck]

I'm so confused... I've gotten to this point but anything I do after this point, the game crashes... Is there anything that I might have missed that allows me to get to this point but it still crashes?

 

 

[youwont123]

1 hour ago, Jeronimous said:

All +10 except Anna. There are many legit 5* Annas out there, there's literally no realistic way they can find out how I got mine to 5*.

 

The method by @lilb3ar10 is the fastest and also the one I use. You can't get any faster than that without custom scripts.

Could you write a more detailed guide? I've done it with GG, but copying and pasting was too time consuming. I'm trying to do it with CE now, but I'm stuck after getting the two values for the units. 

[lilb3ar10]

Ok so here's a dupe guide for CE.

If you dont know how to find character's addresses keep looking in this thread. probably around page 4/5.

 

I started by finding out the values for my shell Odin before the i went to look for a fight.

 

I also found the values for Marth even though i forgot to screenshot but you can see i found both values for Odin. Regular and in battle. I saved the one that i didnt have.

Thats the one you want to change.

 

 

I opened the calculator, set it to hex, searched for marth value, subtracted 118 and right click on the memory window "go to memory" and typed in the value.

As you can see i have my window just the right size for the addresses i need to highlight and the extra row is the original value i start with. DONT HIGHLIGHT THAT ONE.

 

MAKE SURE YOU'RE ON THE INFO SCREEN OF YOUR SHELL BEFORE YOU CONTINUE.

Now just paste them onto the address you found for your shell. your unit should turn red as well.

 

 

Now just win the battle and you should have your unit but you cant edit yet. Swap out weapons, close the game and reload.

 

 

Edit: Forgot to mention this but plz dont put your OP heroes on your first party slot. thats your arena slot. People will be banned but we need to be discrete about how we go about our cheats.  

Edited March 1, 2017 by lilb3ar10
Forgot to say something

[youwont123]

36 minutes ago, lilb3ar10 said:

Ok so here's a dupe guide for CE.

If you dont know how to find character's addresses keep looking in this thread. probably around page 4/5.

 

I started by finding out the values for my shell Odin before the i went to look for a fight.

 

I also found the values for Marth even though i forgot to screenshot but you can see i found both values for Odin. Regular and in battle. I saved the one that i didnt have.

Thats the one you want to change.

 

 

I opened the calculator, set it to hex, searched for marth value, subtracted 118 and right click on the memory window "go to memory" and typed in the value.

As you can see i have my window just the right size for the addresses i need to highlight and the extra row is the original value i start with. DONT HIGHLIGHT THAT ONE.

 

MAKE SURE YOU'RE ON THE INFO SCREEN OF YOUR SHELL BEFORE YOU CONTINUE.

Now just paste them onto the address you found for your shell. your unit should turn red as well.

 

 

Now just win the battle and you should have your unit but you cant edit yet. Swap out weapons, close the game and reload.

 

 

Edit: Forgot to mention this but plz dont put your OP heroes on your first party slot. thats your arena slot. People will be banned but we need to be discrete about how we go about our cheats.  

Thanks for the comprehensive guide. My only problem is that it seems my memory viewer is missing half the lines. For example, the value of the unit I'm looking for is 4E056F28. When I use memory view and go to the 4E056F28 address. All addresses end id 8. I see in your screenshots that every other address ends in a 0. I'm missing all of those memory addresses. Is there a setting or something I'm missing? 

[lilb3ar10]

2 minutes ago, youwont123 said:

All addresses end id 8. I see in your screenshots that every other address ends in a 0. I'm missing all of those memory addresses. Is there a setting or something I'm missing?

the values there just depend on what value you searched for in the first place. if you're getting all value ending in an 8 you're just viewing 16 bytes at a time instead of 8 like me. just shrink your window down a bit.

[bluelamb]

3 hours ago, Jeronimous said:

It is, you only have to do one copy/paste with CE.

Someone here made a video: alphagamers (dot) net/threads/r-fire-emblem-heroes-ver-1-0-2.248478/page-30

The video is using ceserver but that's absolutely redundant, you don't need it at all. When selecting the target process in CE choose NoxHandle.

Okay, so basically skip that whole first minute of starting nox_adb.exe and stuff?

[darez]

I can't do the heart toggle thing if I have more than 1 copies of the same hero. Any tips on how to find my hero in GG?

[rayels]

trying to switch star to 5 star... but when i get to the part where i change the dword to 0 and 5 they wont change after clicking yes it stays the same :/ 

 

edit: i was able to change the star of a legit character.. cant seem to edit the star of a duped character though...

Edited March 1, 2017 by rayels

[Rayariime]

So, only for cloning, CE is a lot faster than GG right? 

[willk7777]

Okay, so I've been trying to change the star rating for my units from four stars to five stars. It works, but whenever I try to level them up, my game immediately crashes. All I did was do the heart trick to find the addresses. Subtract 74 and change that address to 05000000h and subtract 70 and change that address to 0h. I tried the reverse, doing XOR,etc. Always crashes. Anyone help me out? :/ I really want five star robin.

Edit: I'm an idiot and used too many 0s.

Edited March 1, 2017 by willk7777